FS-10 SELF CLEANING INLINE WATER FILTER (10,000 LPH)
-Self cleaning main water filter for commercial & industrial use in water supply systems for apartment buildings, houses, orphanages, schools, kindergartens, Industries.
-Our inline water filters includes 5 types of cleaning in one: Ultramarina,antibacterial,memory,antiphrastic and energy cleaning.
-Serus Industrial main inline filter for water with direct flushing for purification of water from mechanical impurities.High-performance filter with a filtration fineness of 1 micron is designed for filtration of liquid from 5 to 10 m3 per hour.
-Serus FS-10 main inline water filter is used for:filtration of water in systems of hot and cold water supply of industrial and individual use.
Filtration of food products: milk, vegetable oils, juices, water preparation for good manufacturing standards.Filtration of light oil products: gasoline, aviation kerosene, diesel fuel, technical oils.
-Filter for industrial use in water supply systems of apartment buildings, houses, orphanages, schools, kindergartens, Industries.
-The filter element is made of stainless high-alloy steel in the form of a string wound on a frame.
Self-Cleaning Water Filter System In Line Supplier for Domestic, Agriculture, Animal Farming & Industrial Requirement
Nano filter Solution is the Supplier of Clean filtered water with nanotechnology water filter system used for Domestic, Agriculture, Animal Farming, Industrial Water cleaning purpose.
Self Cleaning Inline Water Filter India
Self Cleaning Inline Water Filter
Self Cleaning Filter India
Self Cleaning Water Filter
Performance – 1 M³ /hr (10,000 LPH)
Filtration fineness – 1 micron
Maximum working pressure- 16 Bar
Minimum working pressure- 0,5 Bar
Connection size – 1.5 inch, DN40
Maximum temperature- 100°C
Dimensions (mm) 215x100x70
Approximate Weight 3.5 kg
The fine mechanical cleaning Serus filter FS-10 consists of a body with an internal thread, a string filter element, a water structurer, a drain valve, a bulb, a pressure gauge. The drain valve provides a direct flushing of the filter. The filter is easy to maintain and operate and has compact dimensions.
The Serus self cleaning inline water filter has two modes of operation: filtration and flushing.
In the filtration mode, water penetrates the filter element inside and leaves the filter cleaned.
All mechanical impurities remain outside the filter element at the bottom of the flask .The rinse mode is switched on / off by opening drainage valve at the bottom of the flask During washing, the water stream removes all accumulated debris from both the surface of the filter element and the bottom of the filter housing.The operation of the drain valve can be done manually or with a automatic flushing device.
1.The body and the filter flask are made of stamped brass with nickel plated coating
2.A water structurer inside the filter cartridge made of fine magnet, amber and rhinestone for structured water
3.A fine string filtering element made of high-alloyed stainless steel – NBR seals.
Installation of the filter is possible on plastic and metal pipes. Installation of the filter is recommended after the shut-off valves behind the water meter. Maintenance of the filter is done without dismantling. The filter position is only in the vertical position with the drain valve pointing down. Installation in a confined space is possible.
-high cleaning efficiency
-simple, direct flushing
– maintenance of filter done without dismantling from pipeing system.
-Filter and filter cartridge is guaranteed to operate properly for 10 years guaranteed, without buying any additional filter cartriges.
Serus water filter FS-10 is used for domestic and commercial purposes for the continuous supply of filtered cold and hot water at normal pressure in the pipeline. Prevents the penetration of foreign matter: rust particles, hemp fibers, grains of sand, etc.